Originally posted by mordred On RS linx it should show a computer screen entitled 00 uic. Both the laptops are Toshibas. Well to ease your worry I’ve tested the micrologix and slc slc off a standard rs usb adaptor the model I used was MT the connection works fine through that adaptor. I don’t think so because I’m running the lastest version of RSlinx, v2. In every case, it didn’t work until I changed the comm port to 10 or above.
|Date Added:||21 July 2018|
|File Size:||23.64 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Because of this you will in many cases be unable to make a low-cost USB serial adapter work with Windows 10 or even earlier versions of Windows and you can expect some of the following typical errors:.
No, however it will work with the majority of devices and we guarantee that the processor chip and drivers are fully optimized for Windows 10, Windows 8 and Windows 7 so you will not experience any driver problems. I expect the AB guys would refer a caller to someone with experience Anyone have similar problems? The other combo that does not work properly or as stated in the manual is using a cp3 cable on rthe db9 connector to a SLC Well to ease your worry I’ve tested the micrologix and slc slc off a standard rs usb adaptor the model I used was MT the connection works fine through that adaptor.
Whats your phone number LOL? I tune automotive performance ECUs and have struggled for years with an electronics store brand that The mt6009-2 showed that all was well, yet nothing showed up in rswho. Originally posted by mordred On RS linx it should show a computer screen entitled 00 uic. I finally figured out why I was unable to get a UIC to see anything in RSLinx’s Who window on my laptops, both Toshibas, even though everything checked out in the installation mt6099-2.
Then I should re-phrase that: I then tried comm 10, and all was well! The converter also embeds the DH driver compatible with the existing RSLinx DF1 RS full-duplex driver, eliminating the need for this driver to be installed” Are you are using Mt6099-2 driver and configuring it properly to match the target Baud.
Disconnect the UIC from the computer 4. Yes, I’ve tried it on a Micrologix and ; no luck.
Click here for a deeper technical explanation of these problems. Useful optional accessories not included. I guess I can get a hold of the local AB rep but a lot of times they don’t have the answer either. Displaying 1 to 10 of 14 reviews.
Yes, each converter has it own unique ID number which can be accessed by the user with the D2XX driver programmers guide. I forgot to make that switch however the UIC still worked. Maybe with the USB port. One more anomaly that I did not find documented in AB literature: I verified the port settings first by connecting to the with a standard RS port then set the UIC driver settings to the same.
USB, USB Adapter, USB Cable, USB Extension, USB Host Controller
Guess I better try AB. Originally posted by mordred I wouldn’t give it away as its the only one I found that works on the rs connections.
I have the latest RSLinx 2. Thank goodness I haven’t had a call to work on one of these in fifteen years.
USB to Serial Adapter – Professional
Its the RS port that I’m having trouble with. My new laptop has no serial ports and I’d like to retire my old laptop with seial port. First off you want your switch towards the rs rs serial port. I’ve tried it on 3 laptops of different manufacturers. Originally posted by mmw I wonder how many of us PLC-4 folks are out there. Originally posted by mordred instead I used a standard cat 5 cable off the UIC. Check out that fix I posted up above describing the change to the Latency Timer in the Device Manager.