Don’t connect your phone or cable yet. I’m pretty certain this will work for others also but I haven’t actually tried any other cable so can’t say for sure. If not, you’ll need to configure it with IR, Bluetooth or whatever else it is that you’re using. You are commenting using your Twitter account. The picture is deceptive; things are much smaller than they appear! You should double check your work because the wires are very thin and the pins are small and close together. I already have one of the modern device BUB programmers, and it works a charm.
|Date Added:||2 April 2009|
|File Size:||12.80 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Things seem to have become much easier since then. Thanks for sharing how to do it. The shell can also be put back together with little effort. I did a quick probe to confirms this, then attempted to solder the green wire to the via. You should try the same order too.
Here is the finished FTDI cable: What may be the wrong? A copy of it is available here: So even though the cable puts out only 3. Installing PC Suite The installation is pretty straight forward.
Ports – Prolific Technology Inc. – Nokia DKU-50 USB Computer Driver Updates
Set your multimeter to measure voltage. Can you do me and all the future readers a favor and measure the maximum current you can draw? A dialog box will open asking you to select the serial port to use.
My cable had ground txd and rxd cables only. Hookup the TxD and RxD wires as shown in the schematic. On the toolbar click the up arrow Opengo to Digital, and choose Blink.
[SOLVED] DKU-5 cable (usb to serial) macOS driver
Solder the wires on your header and stick them on a breadboard. For my cable pin 6 was white, pin 7 was blue, and pin 8 was black. What a whining bunch they can be, huh? A resettable fuse is highly recommended. Carrington Theme by Crowd Favorite. Twist the RxD and TxD lines together. To do this cut the cable a couple of inches 5 cm from the phone connector.
And there another cable that was useless. You should find somewhere to download it from. You can uncheck all the options you don’t want.
You can turn off Synchronize if you eku I keep it off because I never use it prolidic because anything that starts when Windows does adds to your boot time.
July 27,5: By continuing to use this website, you agree to their use. Detecting the Cable This is where you connect your cable to the computer. The casing around the USB connector is not a solid piece but a two part shell. You need to install drivers for your cable if you’re using one, that is.
Programming your Arduino with a DKU-5 cable –
Some people end up with 3 wire cables propific others get 4 or 5 wire ones. A USB to Serial driver. Your cable may not have a pin 3 or pin 4 wire.
Attach the red cable to the pin 6 wire TxD.